Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rubber Fabric modelling

Status
Not open for further replies.
soil1999

soil1999

Geotechnical
Oct 18, 2009
39
-Can Abaqus model a fabric sheet in plane strain (2D analysis). What element one should use in this case.
I do not think we should use truss since truss can take compression.
thanks for help
 
Status
Not open for further replies.

Similar threads

spyros_ar
  • Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
2K
FEA way
FEA way
abc123ali
  • Locked
  • Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
462
abc123ali
abc123ali
spyros_ar
  • Question
Solid elements vs Continuum shell elements for modelling a core in a sandwich structure
Replies
3
Views
86
SWComposites
SWComposites
abc123ali
  • Locked
  • Question
Cohesive zone modelling trapezoidal output problem
Replies
1
Views
183
FEA way
FEA way
SKSA
  • Locked
  • Question
Modelling the Slope in Geostress with Dynamic Explicit in Abaqus
Replies
8
Views
227
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom