Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Running NX on a Dell XPS machine 1

Status
Not open for further replies.

Hydrostone

Aerospace
Mar 30, 2007
1
I am looking a purchasing a Dell XPS M2010 because of it's large screen and portability.
See:
The processor is the same as offered on the M90, but the vedio card is different (radeon x1800).
Does anybody have experience with this hardware?

I realize I will probably need to load XP to run NX3 on this, but other than that I think it should do a good job. Am I wrong?
 
Replies continue below

Recommended for you

No. The XPS should work fine. I have a 3 year old XPS gen2 with a Radeon 9800Pro card and it ran V18, NX1 and Wildfire 1 & 2 just fine.
The only thing to remember is that it is not a certified configuration, so any problems cannot be reported as they will blame it on the graphics.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
Sr IS Technologist
L-3 Communications
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor