Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SA-20 Tension Tests (Number of Test Coupons)

Status
Not open for further replies.
oguzzz

oguzzz

Mechanical
Mar 1, 2020
14
TR
We supplied SA 516 GR 485 with 316 Clad quenched and tempered plates. When reviewed the MTC, tension test applied only one sample for each plate but two tension test coupons shall be taken from each quenched and tempered plate , as heat treated according to SA-20. Could you please explain number of test coupons?

Regards.
 
Status
Not open for further replies.

Similar threads

JohnWE
  • Question
Number of thermocouples during PWHT according to ASME section I and B31.1
Replies
2
Views
139
JohnWE
JohnWE
swiftworks
  • Locked
  • Question
7500 PSIG Hydro Test w/ 6M SA-105 Fittings (b31.3 and b16.11)
Replies
5
Views
41
swiftworks
swiftworks
Santiago Vacca
  • Locked
  • Question
Per B31.3 Impact test exemption of weld metal below (continuation of closed thread292-509093)
Replies
2
Views
77
Santiago Vacca
Santiago Vacca
oguzzz
  • Locked
  • Question
SA-20 Tension Tests (Number of Test Coupons)
Replies
0
Views
5
oguzzz
oguzzz
Motivated Apprentice
  • Question
Imapct toughness test/wps/supplimentary essential
Replies
4
Views
348
Motivated Apprentice
Motivated Apprentice

Part and Inventory Search

Sponsor

Back
Top