Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
SAFE Single layer of rebar
- Thread starter TB545
- Start date
You can use the finite element method to achieve rebar area per length and manually calculate required rebars.
if it is not convenient, you can define a rebar with 1e-6 ( approximately zero ) diameter and then assign it to top or bottom rebars. then you can reach to required reinforcement in other layer. notice that you should reform the cover of reinforcement accordance with the place of single layer that you want to be.
if it is not convenient, you can define a rebar with 1e-6 ( approximately zero ) diameter and then assign it to top or bottom rebars. then you can reach to required reinforcement in other layer. notice that you should reform the cover of reinforcement accordance with the place of single layer that you want to be.
- Status
Similar threads
- Locked
- Question
