martin888888
Civil/Environmental
- Jun 15, 2010
- 157
My experience is mainly in residential design and management so wanted to see what response I would get on the use of cleanout in industrial / commercial projects. Large industrial project with minimum 8" sanitary mains and laterals. System currently has a mixture of sanitary cleanouts and manholes in the system. I know the building code says for pipes 8" (maybe 6"?) and larger that you need a clean out every 100'. However I rarely see this standard abided by. We have runs of 8" line 250' with a cleanout on one end and manhole on the other. Other lines 200'+ with cleanouts on both ends. It is very possible to snake those distances but doesnt meet code and I have seen this built time after time.