i got caught out the other day, i've noticed it once or twice before, if i'm in a sub assembly, and i re-name some files, if i just go up to the main assembly and save-all, the next time i load up, it loads as the old sub assembly (load options, as saved), i've got round it before, by saving the sub assembly, then going up to the main assembly and saving that. Am i missing something, or is this just a bug. (NX 5 , and previously in NX 4)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
save all -- Doesn't
- Thread starter moog2
- Start date
JohnRBaker
Mechanical
From the user doucmentation:
Save All
Saves all modified parts and top-level assembly parts. This includes parts that are open but not displayed, but does not include partially open parts, such as components.
If this is literally what it does, it would appear that sub-assemblies are NOT included in a 'Save All'.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Save All
Saves all modified parts and top-level assembly parts. This includes parts that are open but not displayed, but does not include partially open parts, such as components.
If this is literally what it does, it would appear that sub-assemblies are NOT included in a 'Save All'.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
JohnRBaker
Mechanical
Sorry that was the wording as it now appears in NX 6.
In NX 5 it's worded:
Save All
Saves all top-level open parts. This means those parts that do not have parents in the session or have been modified. This includes parts that are open but not displayed, but does not include partially open parts, such as components.
I suspect that nothing has changed just that the new wording is intended to represent better what's actually happening.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
In NX 5 it's worded:
Save All
Saves all top-level open parts. This means those parts that do not have parents in the session or have been modified. This includes parts that are open but not displayed, but does not include partially open parts, such as components.
I suspect that nothing has changed just that the new wording is intended to represent better what's actually happening.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Michael711
Automotive
Thanks John, if I would like to save all of these parts in ASS, how can I do?
JohnRBaker
Mechanical
As odd as it may sound, try this:
File -> Close -> Save All and Close
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
File -> Close -> Save All and Close
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Michael711
Automotive
I mean, If I would like to save all of these parts in ASS to another directory, I do not want to do it using Ass clone,How can I do?
Thanks,
Michael
Thanks,
Michael
Hi Michael,
Apart from clone you can use a thirdparty tool, called ugzzip, please go through this thread
Apart from clone you can use a thirdparty tool, called ugzzip, please go through this thread
- Status
Similar threads
