Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SAW welding flux

Status
Not open for further replies.

engineermat

Mechanical
Mar 17, 2008
47
US
For SAW, can flux used for PWHT be used for non-PWHT welding? For example, can F7P2 designation be used for Non-PWHT welding?
 
Replies continue below

Recommended for you

In some cases you may choose to qualify a WPS with and without PWHT,where the same flux was used.
Lincoln certifies certain wire flux combinations with and without PWHT. eg. LA-71 /880M ( P6 A6 )
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top