Sawtooth Bus Parking dimensions

[mikewdion]

I am looking for information on the curb to curb width for different angles of sawtooth bus parking. Specifically 40 and 45 degrees. A typical 40 foot bus length is to be used.

If any one could point me to a resource or give me some numbers I would greatly appreciate it. Thanks.

 

[CarlB]

The turning template data in the research document may help you lay it out:

LARGE SCHOOL BUS
DESIGN VEHICLE DIMENSIONS
MBTC FR 1054-1
J. L GATTIS and
MICHEAL D. HOWARD

http://ntl.bts.gov/lib/10000/10600/10694/MBTC1054-1.pdf

 

[Maury]

I checked my references and didn't find anything for angle parking of large vehicles (trucks and buses). I would not try to accomodate angle parking of buses on two sides of a center aisle where they drive in and back out. The aisle would have to be huge because of the length of the buses. Instead use a drive thru type of parking, where they vehicles are always foing forward. Use the turning templates suggested by CarlB to layout the design.