Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SB 463 N 08020

Thread starter teokal
Start date Oct 15, 2007

Status: Not open for further replies.

Oct 15, 2007

teokal

Mechanical

Hi! which is the best to weld plate to plate of SB 463 N 08020 and similar piping? I have PQRs with NiCrMo3(GTAW/SMAW), NiCr3 (GTAW) and NiCrFe3 (SMAW). This is about a small pressure vessel with thk 6mm, des. pressure 14 kg/cm2 and des. temp. 80 Celcius; contained fluid napthtenic caustic. Thanks.