Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SBR Latex Modelling on ANSYS

Status
Not open for further replies.

huzaifaumar

Civil/Environmental
Sep 19, 2020
1
Hi All !
I would like to know how to model SBR Latex mortar as a an external confinment to a column in ANSYS as the properties are not available. Secondly, can we call it a hyper elastic material and model it via ogeydan ( because of SBR having 560% strain) model ? If yes what is the procedure/ test to know the parameters used in the model. Will be great full for the anticipation.
 
Replies continue below

Recommended for you

There are many different hyperelastic models. You should determine what model best fits experimental data and use this model.
You determine model coefficients that provide best fit to experimental data using curve fitting procedure. Usually you need three types of experimental results: uniaxial tension, biaxial tension and pure shear.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor