I have a cell in my drawing about 3000 times, but they are at various scales. I would like to make all of these cells the same scale about the origin. I d/l'd CADGURUS "cell2scale" but it has not worked, it keeps giving me an error 1702 on line 61. Any help or recommendation for a different macro?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Scale all cells?
- Thread starter fudaspan
- Start date
Fudaspan,
The question would be do you need all of those cells? If not use your deldup mdl it will get rid of all duplicates. I will look into the code error and see what I can find out. Otherwise erase all of the cells and place the one you want at the location.
Regards,
Namdac
The question would be do you need all of those cells? If not use your deldup mdl it will get rid of all duplicates. I will look into the code error and see what I can find out. Otherwise erase all of the cells and place the one you want at the location.
Regards,
Namdac
- Status
Similar threads
