Nov 2, 2006 #1 Runz Aerospace Oct 3, 2005 216 I thought there was a setting for the size of the workplanes in the display and also a way to turn scaling on/off? Thanks,
I thought there was a setting for the size of the workplanes in the display and also a way to turn scaling on/off? Thanks,
Nov 2, 2006 #2 5050t Aerospace May 9, 2006 83 Part Infrastructure - Display tab - Axis system display size Upvote 0 Downvote
Nov 2, 2006 Thread starter #4 Runz Aerospace Oct 3, 2005 216 "...and scale under Display - Vis tab" What does this do? I had it set to on and changed it to off, but nothing seems to have changed. Setting the axis system size helped (Made them larger), but I wanted to have the workplanes get larger as I zoomed in and get smaller when I zoomed out. Thanks, Upvote 0 Downvote
"...and scale under Display - Vis tab" What does this do? I had it set to on and changed it to off, but nothing seems to have changed. Setting the axis system size helped (Made them larger), but I wanted to have the workplanes get larger as I zoomed in and get smaller when I zoomed out. Thanks,
Nov 2, 2006 #5 5050t Aerospace May 9, 2006 83 Sorry, that you can't do. For you SCALE question I thought you were referring to "Scale in parallel mode". Upvote 0 Downvote
Sorry, that you can't do. For you SCALE question I thought you were referring to "Scale in parallel mode".
Nov 3, 2006 #6 jackk Mechanical Nov 22, 2002 1,306 Runz, the Scale option you asked about displays the zoom factor down in the lower-right corner (in front of the axis). Since the image can't easily be resized to a specific scale, I find that number helps me get a feel for how big/small my designs actually are. Upvote 0 Downvote
Runz, the Scale option you asked about displays the zoom factor down in the lower-right corner (in front of the axis). Since the image can't easily be resized to a specific scale, I find that number helps me get a feel for how big/small my designs actually are.
