Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

scaling factor display style / format

Status
Not open for further replies.

Vertx

Automotive
Jan 16, 2012
10
Catia V5 R21

Trying to update the xml file of drafting standards.

I'd like to know how to modify the display style of the scale when a view is created.

e.g. 1:1 or 1/1
Displayed when the scale is different than 1:1
There does not seem to be an interface for this..
Some dassault original ASME drafting standard .xml files have something under the "VIEW" node mentioning the display symbol or separator and display condition but this is not visible in Catia's tools>standards' editor ...
I've tried pasting the " view " block of text from original .xml to our customized .xml file... I've located it since it's ending with the material cut pattern, which is shown in catia's editor...
No sucess.. I don't know if it's a dependency/level problem... It's a bit beyond my competences but I really need to make this happen..

Any help would be greatly appreciated.
Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor