Scan conversion 2

[CAD2015]

Hi,
I got a scan file from which I need to create a full parametric model.
The current geometry can't be selected (I tried to create a plane).
What would be the best approach in order to create a parametric part?
Thanks,


CAD 2015

 

[ferdo]

Hi,

Stl file? Or what kind? I believe you need a special workbench....

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

- Romania

https://picasaweb.google.com/103462806772634246699/

- EU

 

[ferdo]

Sorry, is release 22, just tomorrow I will have access to my v6r2013.

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

- Romania

https://picasaweb.google.com/103462806772634246699/

- EU

 

[CAD2015]

Whenever you have time.
I am very curious about your and others opinion in this matter.

CAD 2015

 

[CAD2015]

I haven't received any reply for this thread so far (excepting Ferdo's).
I believe that this topic is not an easy one for anybody.
At the moment, the only option seems to be a design that matches the picture (I wouldn't name it geometry) as close as possible.
Any other ideas?....

CAD 2015

 

[rstupplebeen]

I recently created a blog with a similar topic. In this case it was to create a jaw from scan data.

http://optimaldevice.com/blog/dental-x-ray-to-bite-simulation/

I hope it helps.


Rob Stupplebeen
OptimalDevice.com
My LinkedIn

 

[CAD2015]

Thanks Rob.

CAD 2015

 

[rstupplebeen]

Your welcome.

This blog might be a better fit because I fit NURBS geometry to the head of the femur.

http://optimaldevice.com/blog/femur-ct-scan-to-finite-element-analysis/

I hope this helps.


Rob Stupplebeen
OptimalDevice.com
My LinkedIn