Apr 10, 2008 #1 TheMan51 Automotive Feb 8, 2007 109 0 0 US When I attempt to use emboss the embossed feature is not closed. How would I rectify this? thanks
Apr 17, 2008 #2 marcmata Automotive Apr 17, 2008 25 0 0 US Hi, First check that the section used in the emboss is closed, anyway you can select Wireframe and create a new one. Good Luck. Upvote 0 Downvote
Hi, First check that the section used in the emboss is closed, anyway you can select Wireframe and create a new one. Good Luck.
May 6, 2008 #3 SDETERS Agricultural May 1, 2008 1,264 0 36 US Change the draft angle. You will have to play with this to get no free edges. Upvote 0 Downvote