Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Secondary side of chilled water piping - Stress Analysis

Status
Not open for further replies.
BIPVguy

BIPVguy

Mechanical
Joined
Jul 23, 2007
Messages
37
Location
RS
Dear all,

I have been tasked to do stress analysis of secondary side chilled water piping to determine stress risk on plate heat exchangers (PHEX). Secondary side (flow 5.5C and return 14.5C) piping extends horizontally (from PHEX to risers) and vertically from risers, branches to each FCU on 90m high building.

Any advise, example calculation, link, source would be greatly appreciated.
Thanks muchly.
 
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Chilled Water Buffer Tank - Primary/Secondary - Design Help
Replies
7
Views
5K
BronYrAur
BronYrAur
B
  • Question Question
Chilled Water Constant Flow Reverse-Return Bypass
Replies
16
Views
20K
Btutiful
B
keenfirengineer
  • Locked
  • Question Question
Automatic Balancing Valves in Chilled Water Header System
Replies
16
Views
2K
georgeverghese
georgeverghese
123131415
  • Question Question
REQUIREMENT OF COOLING TOWER IN WATER COOLED CHILLER SYSTEM
Replies
6
Views
15K
SAK9
SAK9
IanVG
  • Locked
  • Question Question
Primary Secondary Zone Chilled Water System Functionality and Resources
Replies
1
Views
459
nuuvox000
nuuvox000

Part and Inventory Search

Sponsor

Back
Top