Section view cut lines in orange 1

[RobLN]

Hi

Just a quick quesion to the forum, my company seems to want to make all the sections view cut lines / & text in orange... Is this actually allowed? I thought that all sections had to be black... (from past experience)

Thanks.

Rob

Solid Edge; I-Deas 7 to 12; NX4 to NX8.5 / TeamCenter 9.1 & Ansys 14.5 / SW 2016 - 2018

 

[CheckerHater]

There is no standard regulating use of color on the drawings (yet)

So it's all about deliverables - whatever your customer (or your boss) wants to see.

If your customer is the government, they would expect black, just like you are expected to use black or blue ink filling forms (you don't fill your 1040 in orange, do you?)

But since color is here, I expect it to be used and abused in years to come.

Good luck!

"For every expert there is an equal and opposite expert"
Arthur C. Clarke Profiles of the future

 

[drawoh]

RobLN,

How is this orange colour going to look on a black and white print-out?

Tips on Designing Cost Effective Machined Parts. Click on DRAWINGS AND PRINTS, and scroll down a little.

--
JHG