Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section Views from model to drawing

Status
Not open for further replies.
creativevehicle

creativevehicle

Automotive
Feb 25, 2005
1
My coworkers and I are new to Catia from UG so please bear with me. I have a section view that I created with the DMU within an assembly. I set it up with a grid system. I figured out how to get my section into a drawing. But I want the grid to come with it. It must be full scale so a screen dump won't work. Please Help!
 
Status
Not open for further replies.

Similar threads

thallwright893
  • Locked
  • Question
Catia Drafting: Add section cut callout to views created using 'View from 3D'
Replies
0
Views
91
thallwright893
thallwright893
sri91
  • Locked
  • Question
lock views password
Replies
2
Views
105
sri91
sri91
DiaeArrahmane
  • Locked
  • Question
CATIA MACRO: Section view from a plane reference
Replies
2
Views
117
DiaeArrahmane
DiaeArrahmane
O
  • Question
Abaqus2024 - Duplicate elements in model
Replies
0
Views
406
Old_Ironfighter
O
Sidtha
  • Locked
  • Question
How to extract the values from prodcut properties window
Replies
1
Views
88
Sidtha
Sidtha

Part and Inventory Search

Sponsor

Back
Top Bottom