The client was asking recommendations on durable painting system to be applied to the exterior surfaces of large (20' diameter), tall (150') steel (base material unclear) stacks located in a steel mill setting (sinter plant) at the midwest region, close to lake. The paint selected should be able to sustain 400 degrees of heat and chemical attack from furnace gas. Any suggestion on the paint material/spec/standard/vendors is appreciated. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Seeking advices on painting materials/preparation for steel stacks
- Thread starter kslee1000
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question