Sepam 1000 2

[charlierod]

Does anyone has an idea about where i can find a manual of MG's Sepam 1000?

This relay seems to discontinuated so i have not been able to find information about it.

Thanks for your comments

 

[dede61]

Try Schneider.com

kind regards,

danny

 

[jbartos]

Suggestion: Start with

http://www2.schneider.co.uk/seweb2/...luAllByID/JPAE-5AVDEG/$file/Training_HVLV.pdf

 

[EddyWirbelstrom]

Charlierod
If you have no luck with Schneider's website, I have hard copies of Sepam 1000 ( replaced by Sepam 1000+ series ) catalogs "Sepam 1000 Series, Protection & Measurement" and "Sepam 1000 Substations,Busbars,Transformers and motors".

 

[charlierod]

mnewman:

Up to know i've not been very lucky in finding information in the web, so it would be really helpful if i can get those catalogs from you. How can i contact you?

 

[charlierod]

Here's some information read from the relay, i have some idea about its interpretation but due to the lack of exact information i haven't been able to correctly predict the operation of the equipment, if somebody can interpret this please tell me

Metering

IM1=817 A
IM2=817 A
IM3=765 A
TRIP1= 817 A
TRIP2= 800 A
TRIP3= 783 A

Status

In= 1,2 kA
Ino = 1,2 kA
fn = 60 Hz
LATCH = YES

Relay

50N/51N
Curve = EIT (Extremely Inverse Time, IEC-C)
Iso = 180 A
to >= 200 ms
Io >>= 3,6 kA
to >>= 50 ms

50/51
Curve = EIT (Extremely Inverse Time, IEC-C)
Is = 1,2 kA
t >= 200 ms
I >>= 14,4 kA
t >>= 100 ms

 

[jbartos]

Suggestion to the previous posting: Also contact the manufacturer tech support to have the official support.
Please, have you perused the SEPAM literature on the following web:

http://www.squared.com/us/products/...985256C63006CE494/$file/sepamtechdatapage.htm

 

[EddyWirbelstrom]

Charlierod
re: Sepam 1000 ( note Sepam 1000+ ) catalogs.
Sorry for the delay in answering.
I have some old Sepam 1000 catalogs I can scan and send to you.
What info do you want and where do I email it?
Murray Newman

 

[charlierod]

Thanks for your interest in helping me. Specifically i need information about protection functions which should be contained in the following documents:

Metering and Protection Functions (AC0396(1))
Control and Monitoring Functions (AC0396(1))

I wonder if there's a document related to maintenance, if so and if you have it please send it too.

You can send information to the following e-mail:

c_rodriguez@lycos.co.uk

Thanks for your help