Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Servo Motor Humming

Status
Not open for further replies.

gcastro

Mechanical
Aug 6, 2004
4
What could be the possible causes for a humming servo motor ?
I am new in the field and if you need more details please ask.

Thank you
 
Replies continue below

Recommended for you

IT SOUNDS LIKE YOUR GAINS ARE SLIGHTLY TO HIGH, ON YOUR
AMPLIFIER DRIVE REDUCE PROPORTIONAL OR INTEGRAL GAIN THIS CAN BE A COMMON FAULT.MAKE ANOTE OF THE SETTINGS INCASE
ALSO THE ADJUSTMENT SHOULD BE DONE WITH A SCOPE BUT YOU CAN DO IT WITHOUT ONLY MAKE A VERY SMALL ADJUSTMENT.
 
laundry; your caps lock is stuck...

gcastro;
Along with skogs question,
What size servo?
What is it driving?
What is controlling it?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor