keddano
Automotive
- Oct 28, 2005
- 10
Trying to set up a HP Deskjet 9650 for use with UG NX,Think I having problems with the plotter switches. Here's the set-up in Pqmgr:
Despooler name =UGIIHP
Plotter Vendor =Hewlett-Packard
Plotter Type =Electrostatic
Number of pens =8
Controller ID =
Plotter Model =9659
Plotter Switches =/AR/AS/17/MO/BS=0.0x0.0
Media Control =Continuous
Distance between Plot =0
Output Mode =Queue
Plotter Com Line =
System Queue Name =\\nickel-serv\hp9650
Directory Pathname =
Tape Density =1600
Message Interval =
Message Com Line =
Horizonal Maximun =0
Vertical Maximum =0
Steps per Inch =1420
Optimization Level =None
Thanks in advance,Dan
Despooler name =UGIIHP
Plotter Vendor =Hewlett-Packard
Plotter Type =Electrostatic
Number of pens =8
Controller ID =
Plotter Model =9659
Plotter Switches =/AR/AS/17/MO/BS=0.0x0.0
Media Control =Continuous
Distance between Plot =0
Output Mode =Queue
Plotter Com Line =
System Queue Name =\\nickel-serv\hp9650
Directory Pathname =
Tape Density =1600
Message Interval =
Message Com Line =
Horizonal Maximun =0
Vertical Maximum =0
Steps per Inch =1420
Optimization Level =None
Thanks in advance,Dan