Shaded solid with edges in another color 1

[danpasholk]

Hey
Newbee here, can Pro-e display a shaded solid with the edges in a different color or any color that hightlites the edges?
Your help is most wecome.
Thanks, Dan

 

[danpasholk]

Hi:
I found using View > Display Settings > Model display > Shade Tab > check box > With edges

The shaded model will display with contrasting color displayed edges. So is there a user defined edge color available?
Thanks, Dan

 

[loughnane]

I was actually looking for a way to change the color of the edge lines just the other day.

Unfortunately we just had to settle, but would definitely be interested to hear the solution.

Couldn't even find a config.pro option

Chris Loughnane

http://www.pdnotebook.com

http://www.twitter.com/DesignNotebook

 

[dgallup]

Make the complete model one color then select all the surfaces and make them a contrasting color. You will get the effect you are looking for.

It should be easier.

 

[proestrain]

Sorry for the late posting.

See quadamage76's reply in the following thread (last post);

http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=35768&PN=1&get=last

I used the above method and created a library of colours with to show black edges and saved-as my own appearence file. This way I only have to load the appearence file once at the start of a session.

 

[dgallup]

That works pretty well but all your appearances will be completely matte (no shine).