Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shaft run-out check

Status
Not open for further replies.

Hamza1988

Mechanical
Jul 4, 2015
37
BH
Hi guys, During the run-out check of a pump shaft, how important is it to make sure that the two V-blocks are vertically at the same level. In other words, the shaft being check for run-out is perfectly horizontal.

Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top