Sharp plc prog help 1

[Zalmaflash]

I have just aquired several SHARP plcs. They are used but do work. They are JW-70CUH's and have various input modules and outputs. It also came with a handheld programmer JW-13PG, which plugges in to the front of the plc. It also came with a manual written in Japanese, which is no help to me.

Is there a program avail. that I can run on my personal PC to write a program for it? I'm not to bad with the Allen Bradleys but don't have a clue on the Sharp.

This is for a personal project so CHEAP is important.

Thanks in advance for any and all help
Russell

 

[ozmosis]

try this. Not sure if it works but Mr.Google pointed me there.

http://sharp-world.com/sms/index2.html

There seems to be a few areas of software downloads when clicking further into support material. I even spied a free software download, so I guess this is the sort of thing you need. I just hope your personal project is not life threatening.

 

[Zalmaflash]

Nope, not life threatening (unless my wife's opinion of my projects is considered)

Russell