Feb 7, 2006 #1 jet1749 Mechanical Jun 3, 2003 82 Any one have a reference source for the shear strength of EN24T or EN16T?
Feb 7, 2006 #2 Carburize Materials Sep 23, 2002 702 Both EN 16T and EN 24T have tensile stengths of: Yield 98560 psi min Ultimate 123200 - 145600 psi. Perhaps someone can suggest a reasonable relationship between this data and shear properties. Upvote 0 Downvote
Both EN 16T and EN 24T have tensile stengths of: Yield 98560 psi min Ultimate 123200 - 145600 psi. Perhaps someone can suggest a reasonable relationship between this data and shear properties.
Feb 8, 2006 #3 metengr Materials Oct 2, 2003 15,478 If you cannot obtain published data, the one correlation that I have seen for approximating ultimate shear strength from tensile strength for carbon and alloy steels is 0.75 * Ultimate tensile strength Upvote 0 Downvote
If you cannot obtain published data, the one correlation that I have seen for approximating ultimate shear strength from tensile strength for carbon and alloy steels is 0.75 * Ultimate tensile strength
Feb 8, 2006 2 #4 CoryPad Materials Apr 15, 2002 5,192 metengr, Most of the data I have seen for shear strength is ~ 0.6 times the ultimate tensile stress. thread725-32814 thread404-83055 Actual data can be found for many materials in AR-MMPDS-01 or MIL-HDBK-5: http://www.airplanedesign.aero/inde...=40&func=fileinfo&filecatid=3&parent=category http://assist.daps.dla.mil/quicksearch/ Regards, Cory Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora. Upvote 0 Downvote
metengr, Most of the data I have seen for shear strength is ~ 0.6 times the ultimate tensile stress. thread725-32814 thread404-83055 Actual data can be found for many materials in AR-MMPDS-01 or MIL-HDBK-5: http://www.airplanedesign.aero/inde...=40&func=fileinfo&filecatid=3&parent=category http://assist.daps.dla.mil/quicksearch/ Regards, Cory Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Feb 8, 2006 Thread starter #5 jet1749 Mechanical Jun 3, 2003 82 Many thanks for your responses which have been very helpful.The 0.6 times tensile strength r.o.t seems to hold up quite well. regards John Upvote 0 Downvote
Many thanks for your responses which have been very helpful.The 0.6 times tensile strength r.o.t seems to hold up quite well. regards John
