Sheetmetal Bend Lines no coming up in flat pattern View

[supercub]

When I make a drawing of a sheetmetal part and select one view as flat pattern, I get bend notes but no bend lines. I went through the properties and still no bend lines. Any ideas?

 

[SBaugh]

Try and go to View\Sketches and make sure they are selected.

Scott Baugh, CSWP
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376