Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

shortcut keys Pro Engineer Wildfire 3.0

Status
Not open for further replies.

tazengr

Mechanical
Mar 1, 2007
34
I am learning Proengineer wildfire 3.0 and I have been using Solidworks since version 2002. In solidworks you can assign shortcut keys.
For instance under tools --> customize you can assign the letter s for the smart dimension and just click on the s button and it will invoke the dimensioning tool if in sketch mode.
Can you do this in Pro E or do u have to click on the button toolbar?
Thanks,

 
Replies continue below

Recommended for you

Check this link:
It's a good article on accelerting a pro/e design....map keys

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor