Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shutin Pressure Test, Build Up response

Status
Not open for further replies.

moredrilling

Petroleum
Feb 20, 2017
5
0
0
US
Hello Sirs,
We recently had to shut in few wells and in the process were able to record pressure data for build-up analysis. The PIP was used to generate the following build-up log-log interpretation. Few of the wells were showing a long period of a shallow <1/2 slope on the derivative plot. It could be justified as partial penetration which is reasonable with the perf distribution we have in the well, but it looks suspicious. Is there anything else worth considering? The esp sensor is near the top of the first perforation. Image to the interpretation is below.
Ur9ks

Thank You
 
Status
Not open for further replies.
Back
Top