Feb 5, 2012 #1 12bucklemyshoe Chemical Jan 21, 2012 8 How do I communicate with this thing with my hart 475 communicator? Please help!
Feb 5, 2012 #2 danw2 Industrial Oct 21, 2004 1,505 Like you do with any transmitter, assuming it is HART, but do not power the PS2 with a 24Vdc power supply, power it with 4-20mA loop simulator. Install the PS2 HART DD in the handheld. If Rosemount doesn't have it, the PS2 positioner's DD file for the 375 is here: http://support.automation.siemens.c...tandard&viewreg=WW&objid=42086580&treeLang=en Note that the outlined download is for the 375. Power the positioner with a 4-20mA loop power simulator, NOT a 24Vdc power supply. The PS2 has more than 250 ohms inptu resistance so the handheld will read it by attaching the leads on the PS2's analog input. Upvote 0 Downvote
Like you do with any transmitter, assuming it is HART, but do not power the PS2 with a 24Vdc power supply, power it with 4-20mA loop simulator. Install the PS2 HART DD in the handheld. If Rosemount doesn't have it, the PS2 positioner's DD file for the 375 is here: http://support.automation.siemens.c...tandard&viewreg=WW&objid=42086580&treeLang=en Note that the outlined download is for the 375. Power the positioner with a 4-20mA loop power simulator, NOT a 24Vdc power supply. The PS2 has more than 250 ohms inptu resistance so the handheld will read it by attaching the leads on the PS2's analog input.
Feb 6, 2012 Thread starter #3 12bucklemyshoe Chemical Jan 21, 2012 8 How do I get the ps2 hart DD from online to on my hand held? Upvote 0 Downvote
Feb 6, 2012 #4 danw2 Industrial Oct 21, 2004 1,505 I don't have access to one, so I don't know. You'll have to get the 475 documentation and figure it out, unless someone else pops up. Upvote 0 Downvote
I don't have access to one, so I don't know. You'll have to get the 475 documentation and figure it out, unless someone else pops up.
