Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Silica Solubility

Status
Not open for further replies.

crdavids

Mechanical
Nov 15, 2007
2
0
0
CA
Hi,

I am looking for literature on running steam generators at high pH to maintain the Silica in solution. I am having a hard time finding papers, journals and texts on this and I would really appreciate some help if you know of any great places to look.

Thanks!
 
Replies continue below

Recommended for you

Go to the library. They have the capability for inter library access to universities and other resources.

One book is ASME Handbook on Water Technology for Thermal Power Systems.


Contact your local water treatment supplier such as Betz or Nalco.
 
Are you running once through steam generators to produce 75 - 85% steam or conventional steam generators to produce saturated or superheated steam?

You might find help with solving your problem by looking at the figures on pages 3 and 4 in the following document.


If you are running once through steam generators do notforget to worry about the Na, Fe, SiO2 disalt that can form and cause a very serious tube deposition problem.
 
Status
Not open for further replies.
Back
Top