Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulation of an abrasive machining process with Catia

Status
Not open for further replies.

afry

Materials
Aug 12, 2014
10
Hello,

I would like to simulate an abrasive machining process whitout the abrasive tool giving from catia.
The abrasive machining process consists of three important mouvements:
- The workpiece has a rotation movement around the Y axis.(Rotation speed=500 rpm)
- The workpiece has also an oscillation movement around the Y axis.(Oscillation length=30mm)
- The tool has an infeed movement of 1µm in the direction of the X axis.

A figure that ilustrates the abrasive machining process is attached in the link below.
Do you have any idea how to realise this simulation with the software catia in the workbench machining ?


Thank you in advance
 
 http://files.engineering.com/getfile.aspx?folder=2953f27a-d17e-42b3-afac-c403903b7b62&file=Drawing_Abrasive_machining_process.bmp
Status
Not open for further replies.

Part and Inventory Search

Sponsor