Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Single Phase Generator

Status
Not open for further replies.

paget

Electrical
Aug 18, 2003
4
I have a request for a generator - 10kVA single phase 240volts L-N. 60Hz.
Anyone know of a supplier. Those I've contacted only supply 110/220v 3-wire single phase units.

thanks
 
Replies continue below

Recommended for you

You use the 110/220 (or 120/240V) 3-wire unit (2 hots and 1 neutral), which has a midpoint neutral in a 220 or 240V single phase winding. Do not use the midpoint neutral. But use one of the phase wires as neutral and ground it, you will have a 220 (or 240V) single phase generator. Make sure that the midpoint neutral is not grounded, check with mfr.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor