Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Size / Colour of Dimensions in Part Sketch Mode 1
- Thread starter biggles2
- Start date
-
1
- #2
What version of Solid Edge are you running?
Try going to Style... under the format menu and adjusting the dimension style(s) you are using in the profiles/sketches. The text height and arrow size as well as much more is controlled there.
I asked what version you're running because the graphic display of some entities has changed throughout revisions because of the way dimensions and contraints were sized when zooming a profile.
--Scott
For some pleasure reading, the Round Table recommends FAQ731-376
Try going to Style... under the format menu and adjusting the dimension style(s) you are using in the profiles/sketches. The text height and arrow size as well as much more is controlled there.
I asked what version you're running because the graphic display of some entities has changed throughout revisions because of the way dimensions and contraints were sized when zooming a profile.
--Scott
For some pleasure reading, the Round Table recommends FAQ731-376
- Status
Similar threads
- Locked
- Question