MisterDonut
Mechanical
Spirax-Sarco has a useful tutorial:
The short answer is:
Figure out how much is coming into the vessel and how much of that is flahsed to steam
Size the diameter of the vessel such that the velocity of the steam does not exceed 10 ft/sec.
http://www.spiraxsarco.com/resources/steam-engineering-tutorials/condensate-recovery/flash-steam.asp
The short answer is:
Figure out how much is coming into the vessel and how much of that is flahsed to steam
Size the diameter of the vessel such that the velocity of the steam does not exceed 10 ft/sec.
