Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch dimension shown on drawing.............. 1

CAD2015

Computer
Jan 21, 2006
2,030
Hi,

Is it possible to make the sketch dimension shown on a 2D drawing view?

Thank you!
 
Replies continue below

Recommended for you

You will need to turn it to a PMI dimension, then I think you can. If you right click on the dimension, turn it to PMI. Then you can process this down into your 2D drawings. There will be some switches in your 2d drawing that you need click on. Double click your 2D drawing border, then go to PMI and toggle it from none.
 

Part and Inventory Search

Sponsor