sketch from DXF issues

[JustinFFE]

I'm having some issues importing DXF's for a sketch.

When i place the sketch and scale it appropriately the sketch erases and an error comes up reading " section solve failed".

I'm not sure why i looked at the dxf and it's a closed polyline in autocad. No dual entities either.

Any help

 

[dgallup]

I would try exploding the polyline. I'm not sure Pro/E can deal with a polyline, it certainly never creates one in a DXF out.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.