Sketching Question

[VN1981]

Is there any feature in Catia to enforce curvature continuity between arcs/curves inside sketcher environment? Tangency is readily available...been searching the web but could not find any helpful answers. I am using R28 version...

 

[VN1981]

Answering my own question partly...Ref

http://catiadoc.free.fr/pdf/EN-c03_cat_v5r18.pdf

There is an option to connect two curves with a spline and options to enforce G1 & G2 (not sure about G3) continuity are presented in Sketcher Environment.