Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Slab gate with DIB
- Thread starter Kreot
- Start date
Nick_Gray_88
Mechanical
Are we talking about DIB-1 and DIB-2 as per API 6D??
LittleInch
Petroleum
Split wedge yes. Simple slab, don't think so.
Wedge gate, maybe.
Ask the vendor?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Wedge gate, maybe.
Ask the vendor?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Nick_Gray_88
Mechanical
You can get spring energised seats to do it, if we’re going for the 6D definitions it’s going to be a special product for at least one of the valve designs.
Is just why you’d want it, DIB-1 you’d need a vent/drain connection to the body cavity.
DIB-2 you need to be very careful how you install the valve...
Is just why you’d want it, DIB-1 you’d need a vent/drain connection to the body cavity.
DIB-2 you need to be very careful how you install the valve...
LittleInch
Petroleum
Looking at the definitions these seem to refer to ball valve seats not gate valve seats.
Slab gate valve seats generally rely on pressure on one side to seal the slab against the seal.
But different vendors offer different solutions.
Care to expand your question?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Slab gate valve seats generally rely on pressure on one side to seal the slab against the seal.
But different vendors offer different solutions.
Care to expand your question?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
