Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SLC500 to E1100

Status
Not open for further replies.

dave11282

Electrical
May 17, 2005
21
0
0
GB
Hi


I need to connect a Bradley SLC500 to E1100 HMI, over ethernet,

can anyone give me links to application notes , how to set this up

thanks
 
Replies continue below

Recommended for you

I recently connected an 1151 to a compactlogix L63 using ethernet. I am not sure of the 500 but think may work. Go to mitsubishi.com and find the manual for the 1100 and it should guide you through the process. Mitsubishi also has a phone support that may or may not be able to help, they never did me much good.
 
Status
Not open for further replies.
Back
Top