Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

sldprt files required with sldasm file in 2011

Status
Not open for further replies.

rollupswx

Mechanical
Joined
Dec 31, 2007
Messages
918
Location
US
I an running 2010.
Someone sent me a sldasm file of size 1.5 meg, but no sldprt files.
Is there a way in 2011 that they actually sent me something useful with only a sldasm file, or do I still need the sldprt files (assuming I had access to 2011)?
 
1. You STILL need the individual part files.
2. If you are on 2010 and the sender is on 2011 the simplest thing they can do is save the assembly as a single Parasolid file and send you that. Everything will be there, but in a dumb solid form.

- - -Updraft
 
The assy may consist of Virtual Components.

Have you tried opening it?
 
Oops, sorry ... just re-read that you have SW2010, so would not be able to open the assy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top