Milutin
Chemical
- Jul 7, 2006
- 152
Dear all,
We want to start processing refinery slop oil on Visbreaker oil. Slop properties are similar to light crude oil, but can contain up to 5-10% water. My question is how and where to connect slop line to visbreaker unit.
Regards,
Milutin
We want to start processing refinery slop oil on Visbreaker oil. Slop properties are similar to light crude oil, but can contain up to 5-10% water. My question is how and where to connect slop line to visbreaker unit.
Regards,
Milutin