smart fasteners-mark uptodate-can this be done automatically?

[borsht]

Every time I open an assembly with "smart" fasteners, I get an exclamation on the fasteners. I have to do a right click an mark upto date manually. They always seem to be correctly positioned and I dont understand why it always gives me this error which leads me to believe that something is wrong.

 

[SBaugh]

Try this:

Go to Tools\Options\System Options\External References\ and check mark "Update component names when a documents are replaced." Also check mark "Search file locations for External references"

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
When in doubt, always check the help

 

[borsht]

Both are checked, any other ideas?

 

[MrPickles]

I can't get exclamations to appear on them, therefore I can't help.


-----------
Mr. Pickles

 

[dgiy]

I have the same problem and posted a similar question don't know the thread#.
Someone suggested upgrading to the sp4.0. (I use 2003 sp3.1)
I have yet to do this so I can't say if it fixes it.

But I can say that I am as frustrated and annoyed at it as you are

DG