Snap Joint Calculator v2.0 - program review

[Azzazil]

Hello folks,

I made Snap Joint Calculator application for the calculation of parameters and deflections forces for cantilever, annular and torsional joint.

Here is link on my GitHub repository where you can download program with explanation how you can use it. If you have some issues with program please let me know by reporting it on issues page. Just want to point out that this is not an ad for my program, I am just a Mechanical Engineer that want to use my programming skills to make programs that someone will have use of them.

This is my first serious GUI program, so if you can download it on your computer and test it and give me your feedback I would appreciate that?

Best regards

 

[Pud]

So how is this different/better than published info from polymer manufacturers such as GE/Ticona etc.?


Politicians like to panic, they need activity. It is their substitute for achievement.

 

[Azzazil]

Hello @Pud can you post or link that publication here in thread? I couldn't find it via Google.

 

[Pud]

Here is the Ticona design guide in .pdf. (I hope)

[URL unfurl="true"]https://res.cloudinary.com/engineering-com/image/upload/v1639229518/tips/Designing_With_Plastics_-_Ticona_Brochure_vghwzt.pdf[/url]


Politicians like to panic, they need activity. It is their substitute for achievement.

 

[Azzazil]

Hello @Pad thanks on Ticona design guide.

My program is using formulas from Bayer publication on design of snap joints.

 

[Pud]

GE used to do a good one but it's hiding on a drive somewhere.


Politicians like to panic, they need activity. It is their substitute for achievement.