Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SNL - could not read Globetrotter dongle id number

Status
Not open for further replies.

ken1

Mechanical
Dec 11, 2002
40
We just upgraded our server from WINNT to WIN2003.

When I am running thru the SNL-wizard on the new server, I first receive this error....

"Set-up has detected the following unsupported processor/OS configuration: i386/5.2
-The following is req'd
alpha or x86
win2k, winnt 4.0 or win98/95"

I proceed anyway, then receive this error......

"Could not read the Globetrotter dongle ID number"

I was told by my reseller that win2003 is ok to use and my dongle is in place. My dongle id matches the dongle id in the license file as well.

Any ideas on what my problem could be.

Thanks in advance.....
Ken
 
Replies continue below

Recommended for you

You will probably have better luck re-posting this in the Tek-Tips forum:-

forum931 Operating Systems - Hardware Independent
Microsoft: Windows 2003 Server




[cheers]
 
As far as I can tell TEK-TIPS is down right now.....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor