Software to make documentation

[cubalibre000]

Which software I need to purchase to Siemens PLM if I want to make documentation like what can be done with 3DVIA Composer from Dassault ?

Thank you...

Using NX 8 and TC9.1

 

[kapmnit123]

Hi Cubalibre,
You can take a look into Cortona (for technical publication).
Best Regards
Kapil

 

[uwam2ie]

Teamcenter VisPublish
or Latice can be an option

 

[phillpd]

Adobe Robohelp

NX 6.0.5.3
NX 9.0.0.19 MP01
Windows 7 64

 

[cubalibre000]

Thank you to all for the suggestions, but if you use them, can you give me the reason of the choice ?

Thank you...

Using NX 8 and TC9.1

 

[cubalibre000]

For example I would like a software that maintain the reference to the original assembly, so if I change the original assembly, when I open the assembly manual, I see the changing.

Thank you...

Using NX 8 and TC9.1

 

[kapmnit123]

Hi Cubalibre,
Yes cortona integration will enable this change in the original assembly to reflect in the documentation. Sorry i worked on it quite a long time back so cannot comment on all of it's strengths.
Probably you can get in touch with one of your known Siemens representative to ask for more information on the same.
Best Regards
Kapil

 

[cubalibre000]

Hi Kapil,
I'm registred to Cortona3D to test for 30 days.

Thank you for the info.

Thank you...

Using NX 8 and TC9.1

 

[cubalibre000]

I've found

http://www.anark.com/

and

http://digabit.com/

also.

Thank you...

Using NX 8 and TC9.1

 

[curiocity]

Was doing some research on Anark, how did you like it compared to the other software?

 

[cubalibre000]

Anark is the best choice.
The reasons are :
1) assembly or parts used to make documentation are always updated at any original change in NX via server synchronization
2) Software with modern UI
3) very complete tool

other software are far to Anark...

Thank you...

Using NX 8 and PDM RuleDesigner