Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Solid Body & Design Table
- Thread starter tchouk
- Start date
CorBlimeyLimey
Mechanical
Please clarify what you mean by "the property of a weldment solid body cut list".
The property of a cut-list?
The property of an individual body of the weldment?
The property of the whole weldment?
Also what version of SW are you using?
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Helpful SW websites FAQ559-520
How to get answers to your SW questions FAQ559-1091
The property of a cut-list?
The property of an individual body of the weldment?
The property of the whole weldment?
Also what version of SW are you using?
Helpful SW websites FAQ559-520
How to get answers to your SW questions FAQ559-1091
- Thread starter
- #3
I have a part weldment.
Inside I have 3 bodies.
Each body has is cut list-item property like description, weight.
Can I link those properties into a design table?
I am runing SW 2006 SP 3.0
Sorry for the confusion CorBlimeyLimey
Thanks you for your answer
Inside I have 3 bodies.
Each body has is cut list-item property like description, weight.
Can I link those properties into a design table?
I am runing SW 2006 SP 3.0
Sorry for the confusion CorBlimeyLimey
Thanks you for your answer
- Status
Similar threads
- Locked
- Question
- Locked
- Question