Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solid Edge dimensioning glitches

Status
Not open for further replies.

Mick72

Mechanical
Jan 23, 2009
4
Hello All

Could someone help me with the following.

On any draft document that I create, when I am dimensioning a hole, I get a thick circle instead of a diameter symbol, also any GD&T symbols such as flatness I get a lowercase (r).

Any assistance anyone and everyone can provide will be forever appreciated.

Thank you

Your friendly neighborhood drafter.
 
Replies continue below

Recommended for you

Have you checked what font you have selected and that you have the font installed?

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
You can't change the font used for symbols such as GD&T, so I suspect the font file is missing.
I think you should have 18 fonts begining "Solid Edge" in the C:\Windows\Fonts folder

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor