Does anyone know of an issue with Solid Edge freezing, becoming un-responsive when physcally moving (dragging) a part in Assembly? Im using an Academic version of V20. Don't know if its related or not, I recently upgraded my OS from Vista to 7, this wasn't an issue b4 upgrading.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Solid Edge program freezes (un-responsive)
- Thread starter rpjd
- Start date
beachcomber
Mechanical
I wouldn't use V20 with Windows 7.
Maybe ST2 or possibly ST1 but I'm sure that's your problem
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
Maybe ST2 or possibly ST1 but I'm sure that's your problem
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Thread starter
- #3
beachcomber
Mechanical
What version of W7 do you have?
In the Pro version there is an XP compatibilty mode that may be of some use.
I don't know how it works though.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
In the Pro version there is an XP compatibilty mode that may be of some use.
I don't know how it works though.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Thread starter
- #5
beachcomber
Mechanical
Then its not available to you.
Can you update your academic version of SE?
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
Can you update your academic version of SE?
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Status
Similar threads
- Locked
- Question