Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Solidworks 2004 Training
- Thread starter deadeye
- Start date
If you have had SW03 training, then all you need to do is go through the What's new to understand what's new. If you want to take more training in SW04 you have to pay for it.
Once you learn the program well, you won't need any training between versions just the what's new and playing with the version.
Regards,
Scott Baugh, CSWP![[wavey3]](/data/assets/smilies/wavey3.gif "[wavey3] [wavey3]")
![[fish]](/data/assets/smilies/fish.gif "[fish] [fish]")
3DVision Technologies
faq731-376
Once you learn the program well, you won't need any training between versions just the what's new and playing with the version.
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
I just presented a "Whats New" deal at the local SW User Group this week. Will post the whole presentation and discussion on the website this weekend. Maybe it will help you understand what is new easier, and if you want more in depth, then you could check the whats new manual and/or play with it, like Scott suggested.
Check on Monday and see if it will work for you, if you want...
-----------
Mr. Pickles
Check on Monday and see if it will work for you, if you want...
-----------
Mr. Pickles
- Status
Similar threads
